Sensors

Fine Surface Temperature Sensors

The ST-55/56 PFA/ceramic coated thermocouples were designed for use on for small surface areas. These sensors are able to measure many points in a small surface area or, by using an adhesive type ST-55, the sensor can stick to an exact spot for measurement. It is a K thermocouple type capable of measuring temperature up to 500 °C (932 °F). Accuracy is ± 0.5 % ±1 °C.

Temperature Sensor

We manufacture a variety of thermocouples and resistance temperature detectors (RTD).
These can be special ordered to customer specifications.

Flexible Stem Type
Resin Pressure Sensor CZ-GP100

Order stop due date : October 31, 2006 (Japan Standard Time)


AE530	HA430	HA930

CZ-GP100

RKC's resin pressure measuring system is suitable for monitoring and control of resin pressure for extruders.
The CZ-GP100 resin pressure sensor enables the measurement point where instrumentation was impossible in conventional sensor (CZ-100P, CZ-200P).
Since the sensing part is installed separately from a strain gauge (main unit), pressure measurement with a minimum temperature effect can be achieved.
Since the sensing part is installed separately from a strain gauge (main unit), pressure measurement with a minimum temperature effect can be achieved.
We can offer melt pressure sensors with 2-wire type 4 to 20mA input as well as sensors with 4-wire type 0 to 10V and 0 to 5V with an built-in amplifier.
The CZ-GP100 contributes to upgrading of molding product by digital indicator with sensor power supply (AE530), combination of digital controllers for strain gauge input (HA430/930).

HA930, HA430 Special Features --> Click here !

Specification --> GP100_01E.pdf (446kB)
Specification files are in Adobe's Acrobat PDF file (version 4.0) format.
Acrobat Reader is required.

Resin Pressure Sensor CZ-200P

CZ-200P

PG500

PCT-300

HA430

HA930

RKC's resin pressure measuring system is suitable for monitoring and control of resin pressure for extruders.
The combination of resin pressure sensor (CZ-200P), the resin pressure indicator (PG500), the output converter (PCT-300) and digital controllers for strain gauge input (HA430/930) contributes to the improvement of productivity and quality of products.
The CZ-200P has new features such as built-in thermocouple while retaining high reliability of CZ-100P. The features of CZ200P includes: a wide selection of screw type, UNF, PF and M14/16 type screws, Low pressure type (0 to 0.5MPa, 0 to 1MPa), built-in thermocouple.
A push-rod method is used in CZ-200P. There is no risk of contamination in case of accident, so CZ-200P suits food processing application.

Specification --> CZ200_01E.pdf (93.0kB)
Instruction Manual (CZ-200P) --> IM100CZ08E7.pdf (768KB)
Installation Manual (PG500) --> IMR02F01E2.pdf (355KB)
Operation Manual (PG500) --> IMR02F02E2.pdf (425KB)
Communication Instruction Manual (PG500) --> IMR02F03E2.pdf (272KB)
( Instruction Manual (PG410) --> IM41PG01E2.pdf (715KB) )
These files are in Adobe's Acrobat PDF file (version 5.x) format.
Acrobat Reader is required.

Back-pressure Level Meter LE100
	The LE100 is a back-pressure level meter specifically designed for the measurement of liquid chemical levels with high accuracy and repeatability. While in operation, it automatically compensates for changes to specific gravity while providing reports of the bath's current status. Level settings 6 or 8 points Measuring range 0 to 1000 mm Selectable Display Units (mm, %, l, cc, Pa, KPa) High repeatability 0.3% full scale Specific gravity compensation One - touch empty adjustment One - touch span adjustment Volume compensation Digital communication (Optional) Monitoring output (Optional)
Specification --> LE100_01E.pdf (114kB) Specification files are in Adobe's Acrobat PDF file (version 4.0) format. Acrobat Reader is required.