OP10 Compact Setting Display Unit for SRZ Series

Blue Line
Home Page > Application Information - SRZ > OP10 Compact Setting Display Unit > Specifications

OP10 Specifications

OP10

Compact Setting Display Unit for Module type Digital Temperature Controller SRZ series


Display

Display method LCD display
Number of the figures Upper section : 4 digits (Green)
Lower section : 4 digits (Orange)

Communication

Interface Based on RS-485, EIA standard
Connection method 2-wire system, half-duplex multi-drop connection
Synchronous method Start / stop synchronous type
Communication speed 4800 bps, 9600 bps, 19200 bps, 38400 bps
Data bit configuration Start bit : 1
Data bit : 8
Parity bit : Without, Odd, Even
Stop bit : 1
Protocol Modbus-RTU
Maximum connections Z-TIO : 16 modules
* OP10 cannot communicate with Z-DIO-A module.
Z-COM-A : 16 units (However, up to 99 channels.)
* The OP10 can be connected to a Z-TIO module with a Z-DIO module connected, however, it cannot be used to set or display data of the Z-DIO module.
V-TIO-E/F : 16 units (However, up to 99 channels.)
H-PCP-J : 16 units (However, up to 99 channels.)

Power Supply

Power supply voltage 85 to 264V AC [Include power supply voltage variation], 50/60Hz
Rating : 100 to 240V AC
21.6 to 26.4V AC [Include power supply voltage variation], 50/60Hz
Rating : 24V AC
21.6 to 26.4V DC [Include power supply voltage variation]
Rating : 24V DC
Power consumption 4VA Maximum (at 100V AC) , 7VA Maximum (at 240V AC)
4VA Maximum (at 24V AC) , 100mA Maximum (at 24V DC)

Standard

Safety standard UL : UL61010A-1, CSA : CAN/CSA-C22.2 No.1010.1
CE marking LVD : EN61010-1
OVERVOLTAGE CATEGORY II, POLLUTION DEGREE 2
EMC : EN61326
C-Tick AS/NZS CISPR11(equivalent EN55011)

General Specifications

Power failure effect A power failure of 20ms or less will not affect the action.
Memory backup Backed up by non-volatile memory (EEPROM)
Number of writing Approx. 100,000 times.
Allowable ambient temperature 0 to 50°C
Allowable ambient humidity 45 to 85%RH
Mounting method DIN rail mounting socket or Panel mounted
Panel sealing IP66 [Front panel] * Only panel mounted.
Weight Approx. 120 g

External Dimensions
Unit : mm

Socket (Order Separately) External Dimensions
DIN rail mounting type Panel mounting type
Model : ATC180041
(Matsushita Electric Works, Ltd.)
Model : AT78051
(Matsushita Electric Works, Ltd.)
ソケット端子 DINレール取付タイプ ソケット端子台 パネル取付タイプ
Mounting Hole Cutout Dimensions

Terminal Layout
端子説明図 DINレール取付タイプ 端子説明図 パネル取付タイプ
1 to 9 terminals non-uses.
* Communication has access to a connector of OP10 lower part.
DIN rail mounting type Panel mounting type

OP10 top page SRZ Series Module type Digital Temperature Controller

Blue Line
Corporate Profile What's New! Press Release Application Information Products
Home Page
Exhibition Job Opportunities Link Site Map
Blue Line
Back RKC INSTRUMENT INC.